開始搜索
A711 線性驅動IC的應用優點及使用配合條件.PDF
The A711 is a high voltage, low dropout current regulator for high power LED that the maximum output current can be up to 1.1Amp. The output current was decided by an external resistor. The output sink current could be disabled via OE pin. PWM dimming function could also be controlled by OE pin. TO-263 package is available for good power dissipation ability. Build-in thermal protection to prevent the chip from over heat damage, and adequate thermal pad PCB area is required to control the junction temperature below 125°C.
Features
~0.8V Output Drop-out Voltage at 1.1Amp.
~1.1Amp. Maximum Output Current.
~Output Current Controlled by External Resisto
~3us Fast Response Output Stage Enable Control.
~Supply Voltage Range 5V~50V.
~Output Driving Voltage Up To 75V.
~TO-252-5L package
Applications
~High Power LED Driver
~RGB Full Color Power LED driver
~LCD Monitor/TV LED backlight Driver
~LED Table Lamp
Typical Applications
A711 線性驅動IC的優點：
1.去除DC/DC一級電路節省成本及提高整機效率，A711模組效率可達98~93%
2.可輕易通過EMC
3.電路元件極少成本低，電路走線簡單
4.每路燈條和驅動板只有一條接線，排線少組裝容易
5.A711 Vdd 5~ 50V，輸出端75V耐壓，且封裝為TO-220可鎖散熱片可靠度高
6.A711 有EN Pin 可做各種開關斷保護措施，同時有Iset pin 可依各種溫度或光耦等元件，配合開關元件作電流的調節變化
在Vdrop電壓為3V條件下，燒機1小時，A711（TO263封裝）溫度只達42度（環境溫度28度）
http://www.lumen-chip.com（產品詳細查詢）
QQ:2364950905
電話：0755－61335808
手機號碼：13798284764
免責聲明： 本頁面所展現的信息及其他相關推薦信息，均來源于其對應的商鋪，信息的真實性、準確性和合法性由該信息的來源商鋪所屬企業完全負責。本站對此不承擔任何保證責任。如涉及作品內容、 版權和其他問題，請及時與本網聯系，我們將核實后進行刪除，本網站對此聲明具有最終解釋權。
友情提醒： 建議您在購買相關產品前務必確認資質及產品質量，過低的價格有可能是虛假信息，請謹慎對待，謹防上當受騙。
返回頂部
聯系商家
